tel: 800 -284-7007 www.rfswitches.com email: switches@teledyne.com 116 specifications subject to change without notice. 01/2004 commercial ccs-18 high power dc-12 ghz multi - throw switch sp3t to sp6t versions only normally open specifications rf contacts: break before make actuator voltage (vdc) 20 o c 121528 current (ma) 600 480 270 switching time: 20 msec max connectors: sma (f), tnc(f)(max frequency 11ghz only)*, n type (f) weight: 9 oz. max (3 position) 11 oz (6 position) temperature range: -25 o c to +65 o c (operating) shock: mil-std-202 method 213, condition d (500g non operating) vibration: mil-std-202 method 214, condition d (10g rms non operating) humidity: mois ture seal available typical contact life: 5 million cycles rf power handling specifications dc-1 ghz 1-4 ghz 4-12 ghz (tnc limit 11ghz) vswr (max) 1.25:1 1.40:1 1.70:1 insertion loss (min) 0.30 db 0.40 db 0.50 db isolation (max) 70.0 db 60.0 db 60.0 db 3000 800 400 200 80 40 10 power cw (watts) 0.1 1.0 4.0 10 18 26.5 frequency ghz high power connectors standard n type connectors the ccs-18 switch is a broadband multi-position coaxial switch designed to switch rf signals from one input port to any one of 3 through 6 output ports. it is readily adapted to any 50 ohms transmission line system. the standard actuator gives individual solenoid control of each position and when de-energized, all positions are open. standard actua- tor voltage is 28 vdc. the primary advan- tage of this switch over the miniature versions shown on previous pages is the higher power handling capability. typical performance 15 25 return loss 0.01 12.0 frequency ghz 0.01 frequency ghz 0.0 0.4 il db 12.0 isolation db 90 80 70 60
tel: 800- 284-7007 www.rfswitches.com email: switches@teledyne.com 01/2004 specifications subject to change without notice. 117 series connectors actuator voltage part numbering system for ccs-18 (normally open) ccs-18 n 1 5 o - t options actuator type number of switch positions connector s: sma female n: n type female t: tnc female* actuator voltage 1: 28vdc normally open 2: 15vdc normally open 3: 12vdc normally open actuator type o: no indicator contacts c: indicator contacts for other options contact factory number of positions 3: sp3t 4: sp4t 5: sp5t 6: sp6t see additional datasheet for sp7t and sp8t versions sp3t sp4t h = 2.15 std model h = 2.65 ttl model analog indicators ttl commercial ccs-18 high power dc-12 ghz multi - throw switch sp3t to sp6t versions only normally open options t: ttl drivers with diodes r: positive + common td: ttl driver with decoder sp6t sp5t
|
